Codina Architectural TF-35 Metal Mesh

TF-35

TF - 35


Metal profile welded directly to the mesh and surrounded by a U-shaped trim profile; mirror-polished finish. Fastening is accomplished by connecting the clevis screws to the flat bar, inserting the screws through the through-holes. The set includes flat bars, clevis screws, and an additional screw set. All parts are made of AISI 316 material.


Codina Architectural TF-20 Metal Mesh

TF-20

TF - 20


Continuous flat bar, linked to the mesh at the first and / or last spiral of the panel. Tensioners welded to the flat bar; all made of AISI 316 material.


Codina Architectural tf-10 Metal Mesh

TF-10

TF - 10


Bent, hook-shaped rods, made of AISI 316 material.


Codina Architectural TF-75 Metal Mesh

TF-75

TF - 75


Attachment of the mesh to a honeycomb panel via an extra-strong, two-component adhesive. The panel is enclosed by a perimeter frame, in the same colour as the mesh. Z-shaped supports are installed at the back of the panel, for later fastening to a wall. This solution allows the fastening to be hidden.


Codina Architectural tf-45 Metal Mesh

TF-45

TF - 45


Wrap-around ends, with the same mesh at the edges of the panels. Fastening is accomplished by inserting attachment rods in the open space created in the mesh, and installing attachment sockets along the length of the rod. The set Includes rod, sockets, and a screw set. All parts are made of AISI 316 material.


Codina Architectural TF-60 Metal Mesh

TF-60

TF - 60


The fastening system consists of a rod inserted inside the spiral, with attachment eyebolts installed along the length of the rod. This allows the panel to be supported from the top, bottom, and any intermediate area. Fastening is accomplished by connecting the eyebolts to a substructure (not included). The set includes rods, eyebolts, and a screw set. All parts are made of AISI 316 material.


Codina Architectural TF-50 Metal Mesh

TF-50

TF - 50


Perimeter frame consisting of flat bars based on the model of the mesh and requirements of the project, screwed or welded together. This system will require a second fastening of the frame to a substructure (not included). All parts are made of AISI 316 material.


Codina Architectural TF-I30 Metal Mesh

TF-I30

TF-I30


Metal fastening technique for railing

Characteristics

Material: metal

Applications: for railing


Codina Architectural tf-s40 Metal Mesh

TF-S40

TF-S40


Profiled guide made of galvanized steel, with internal mobile carriages. The mesh is attached by connecting the carriages to the hooks or cables, by means of eyelets fastened into the mesh. The set includes the guide, the metal hooks and the eyelets fastened into the mesh.


Codina Architectural TF-15 Metal Mesh

TF-15

TF - 15


Metal profile, bolted and welded on both sides of the mesh, with mirror-polished finish. Fastening is accomplished by connecting the clevis screws to the flat bar, inserting the screws through the through-holes. The set includes flat bars, clevis screws, and an additional screw set. All parts are made of AISI 316 material.